Die-cast parts usually contain a lot of metals, so high-temperature oil heating machines are commonly used. Generally, the working temperature is 320 - 380 degrees. Is there a corresponding die-casting machine that can be used in conjunction with the high-temperature water heating machine? Generally, the high-temperature water heating machine is 180 degrees. The commonly used die-casting temperatures do not reach this level, but there is a type of die-casting that can be used at low temperatures, which is thin-walled die-casting. Now let's delve deeper into this analysis.
With the continuous improvement of die-casting equipment and process technology, the application scope of die-cast products will continue to expand on the existing basis. The dedicated temperature controller for die-casting molds, as the heater of each die-casting machine, plays an indispensable role in the die-casting industry.
As a temperature controller specifically designed for die-casting machines, it has been widely used in the die-casting industry. However, the current water temperature controllers still have drawbacks such as high temperature during use and large internal pressure fluctuations.
Therefore, it is necessary to provide a die-casting high-temperature water temperature machine to improve the heating efficiency and temperature of the water temperature machine. The high-temperature water temperature machine has a higher heat conduction efficiency than the high-temperature oil temperature machine, and is particularly suitable for die-casting thin-walled structural parts. The heat transfer medium of this equipment is soft water, which has an extremely low usage cost and will not pollute the workshop environment. It is a green and environmentally friendly equipment. At the same time, due to the good heat conductivity of water, when the mold needs to be preheated for production, compared with the oil temperature machine, the water temperature machine can raise the mold temperature faster and save energy consumption.
Due to the inherent characteristics of the water temperature machine, when the temperature is higher than 100°C, water will vaporize, and when the operating temperature is higher than 100°C, sealing and pressurization are required. When the pressure increases to 16 kilograms, the boiling point of water can be raised to 200°C. It also has pressure monitoring, flow monitoring, and remote Internet of Things functions, which can fully meet the production needs of industry.
НОВОСТИ